HAYWARD AQUATROL TCEL HOW TO
HAYWARD AQUATROL TCEL GENERATOR
HAYWARD AQUATROL TCEL MANUAL

Important: Many models display the Inspect Cell alert every 500 hours as a cleaning reminder. Instead, it might just need a thorough cleaning. It doesn’t necessarily mean the cell is faulty and needs replacement. Some models display a word, while others might change the color of a word (such as from green to red to indicate a problem).Ī cell alert indicates the salt cell has slowed significantly or stopped working entirely.

HAYWARD AQUATROL TCEL MANUAL

Each brand uses slightly different messaging, so be sure to refer to your owner’s manual for all the details. Your salt system will try to alert you when something’s wrong. Try to rule out all the simple stuff first, so you don’t replace your salt cell needlessly. Phosphate levels that exceed 100 parts per million.Harsh sunlight combined with low levels of pool stabilizer ( cyanuric acid).Potential Problems Unrelated to Salt Cellsīefore replacing your salt cell, consider these other common issues that cause chlorine levels to drop: What’s the temperature? If the pool water is below 50 degrees, less chlorine is required, and some systems will shut off automatically.

HAYWARD AQUATROL TCEL HOW TO

If you don’t know how to check for high or low salt levels, read my guide on how to test the salt level in your pool. The recommended range is between 2,500 and 3,500, although auto-shutoff levels can vary. What’s the salt level? Many SCGs will shut off automatically if the salt level becomes excessively high or low. Some cells have internal connections you’ll need to check, too. Make sure it’s set to Auto or whatever is specific to your brand.Īre all the connections tight? Double-check the connections at the cell and the control box. Is the salt cell system turned on? You can have the unit powered up but not generating chlorine. Is it time to clean the cell? Many systems send an Inspect Cell alert every 500 hours, which is the recommended cleaning schedule. If you suspect an issue with your salt cell, run through the following checklist: Except if the main issue is a lack of chlorine, which alone isn’t enough to indicate a salt cell problem. If your cell is close to or exceeds the 10,000-hour mark, and you notice any of the above signs, it could very well need replacement. Generally, a salt cell lasts for about 10,000 hours, which is usually around five years for most home pool owners.

The SCG isn’t producing chlorine (which could potentially indicate a cell issue).

Amperage is irregular (it should normally be zero or just slightly above).

The Cell Warning light displays consistently, shutting off for only a short while after cleaning.

However, a water sample shows normal salt levels.

The power center displays a Check Salt message.

That said, here are solid indications the salt cell likely needs cleaning, repair, or replacement: New saltwater pool owners often mistakenly blame a faulty cell when the real issue lies elsewhere. Many problems that can occur within the system produce similar symptoms to one another. Understanding when a salt cell might need replacement isn’t always easy. It’s typically located a few feet from the control box, which it’s connected to with a cord. It’s a cylinder, usually around a foot-and-a-half long, placed into the water line. The chlorinated water returns to the pool, where it kills bacteria and prevents algae growth. When water passes through the cell, a low-level electrical charge converts dissolved salt into chlorine. The salt cell is an electrolytic converter installed on the return line behind the filter, heater, and pump. The control box connects to the home’s electrical system. Additionally, it houses an LCD screen or other system to display alerts and other info. It generates the electricity used by the cell. The control box is the brain of the operation. Chlorine is produced naturally instead of added by the pool owners. It’s a system that turns a small amount of salt into chlorine, which in turn keeps your pool clean.

Salt Systems ExplainedĪ saltwater pool is powered by a salt chlorinator. Here’s how to check salt cell function, replace it when damaged, and otherwise keep it in tip-top shape. Ideally, a salt cell will last for about five years, but problems can occur, and issues aren’t always easy to spot.

HAYWARD AQUATROL TCEL GENERATOR

One key element of keeping your saltwater system properly working is monitoring your Salt Chlorine Generator (SCG) cell. However, minimal maintenance doesn’t mean no maintenance at all. Saltwater pools continue to grow in popularity in no small part due to their minimal maintenance needs.

Hayward aquatrol tcel